Measure the distance between the nut of a guitar and the center of its 12th fret for the most accurate way to calculate its scale length (see illustration). Once you’ve determined the value, multiply it by two. And there you have it — you’ve determined the length of the scale. Keep in mind that the length of a guitar scale is commonly measured in inches.
- The scale length of a guitar may be determined by measuring the distance between the inside edge of the nut and the saddle on the instrument. A more straightforward method is to measure the distance from the nut to the 12th fret and then multiply the result by two because this measurement is exactly half the distance from the inside of the nut to the saddle.
- 1 What is the normal scale length for a guitar?
- 2 How many inches is a 3/4 scale guitar?
- 3 How do you calculate fret length?
- 4 How does scale length affect guitar sound?
- 5 Are shorter scale length guitars easier to play?
- 6 What is the scale length of a 7 8 guitar?
- 7 Why does Ed Sheeran play a small guitar?
- 8 Is a 36 guitar full size?
- 9 What is the rule of 18?
- 10 How do you calculate fretboard?
- 11 Is a longer scale guitar harder to play?
- 12 How much does scale length affect tone?
- 13 What is the difference between short scale and full scale guitar?
What is the normal scale length for a guitar?
Simplest definition: scale length is the distance measured between the nut and the saddle along the active/vibrating part of an open string’s open string. The most popular scale lengths for acoustic guitars are 25.4–25.5 inches and 24.75 inches, respectively.
How many inches is a 3/4 scale guitar?
3/4-size guitars are designed for young pupils between the ages of 8 and 11. 36-inch guitars are also referred to as such. Guitars of this size and half-size sizes are the most popular student guitars for children and teenagers.
How do you calculate fret length?
You can find out how far a scale’s open strings extend by multiplying it by 17.817. The result is the distance between the front edge of a nut and the first fret. After being rounded to 18, this number became known as the “rule of 18” and was used for several centuries. For example, the scale length of a common guitar (such as a Fender Telecaster) is 25 inches (648 mm).
How does scale length affect guitar sound?
The wider spacing of harmonics on strings that cover a longer scale creates the sense of more chime and shimmer, and the low E is tighter as a result of this. A shorter scale instrument’s strings produce more densely packed harmonics and hence improve the warmth, thickness, and “fur” of the sound.
Are shorter scale length guitars easier to play?
The same as long as all other elements are identical (string gauge, string length beyond the nut and saddle (string length beyond the nut and saddle), shorter scales yield lower string tension, are more elastic (and thus simpler to fret), and require less arm extension.
What is the scale length of a 7 8 guitar?
The 7/8 guitars measure 37 inches (94.0 cm) in overall length and 24 inches (61 cm) in scale length (61.0 cm). It is just approximately 1 inch (1.5 cm) smaller than the smallest full-sized parlor guitars, making the 7/8 guitar practically indistinguishable from them. Approximately 4 inches (10 cm) shorter than a full-sized dreadnought guitar, the 7/8 guitar is a popular choice for beginners.
Why does Ed Sheeran play a small guitar?
Everybody had been playing small-bodied guitars like Sheeran’s up to that point. This size was created to market a guitar that was extremely loud, with a powerful bass that could be heard clearly even in a busy venue when played in a band without the use of amplifiers.
Is a 36 guitar full size?
What exactly is it? An average full-size guitar might measure anywhere from 36 inches to well over 40 inches in overall length, depending on the model. Because there are so many distinct varieties of guitars, there is no standard overall length for a guitar of any kind.
What is the rule of 18?
The rule is referred to as the “rule of 18” in some circles. Overall, the scale length minus the displacement of the preceding fret, divided by 18 is used to determine the position of the next fret. It was near enough at the time, and it is still quite close today. Despite the fact that the current acceptable number is 17.817.
How do you calculate fretboard?
The width of the fretboard is determined by the following two measurements: The nut width X and Y, the string spacing at the saddle (B), plus two times d are all factors in determining the nut width (“d” is the distance from the outer strings to the fingerboard edge which should be equal along the entire fretboard length).
Is a longer scale guitar harder to play?
Because the strings of a shorter scale are under less stress, they are more easily bent and fretted than their longer counterparts. Additionally, because longer-scale guitars have wider fret spacing, they might be a little more difficult to play than guitars with shorter scales, depending on the size of your hands.
How much does scale length affect tone?
The most important one is TONE. The scale length of a string determines where all of the overtones and harmonics are located on the string. The result of using a longer scale and allowing the harmonics more breathing area is a more clear and ringing tone. Consider the shimmering effect of a Strat in this situation. The rise in tension also results in an increase in concentration.
What is the difference between short scale and full scale guitar?
Short-scale guitars, as the name implies, have a shorter scale length than standard guitars. Guitars with a “long scale” or full scale length have a 25.5-inch scale length, plus or minus an inch, depending on the manufacturer. Short scale guitars, on the other hand, have a scale length ranging from 22 to 24.75 inches, depending on the manufacturer and model.